3.0.87 Fixed a bug in the shell command when opening files with ultra edit 3.0.86 Added backdate maker to Image Analyzer (beta) Improved message for device not ready Improved responsiveness of cancel Improved SYSFRAME maker added PAYLOADS, REFPOS makers Can now choose to make CF or CM for install scripts Added General Electric MACs for older robots using GE FANUC made ethernet adapters If user adds MDB or FMD as backup sources, then allow deselect of MD Add Make DCS, COUNTS, etc CM files under FANUC Tools Double click of file types now opens the file properties Fixed a bug where some settings Backup Manager were not being saved Can edit notes from Backup Manager and backup properties page Cleaner exiting when a corrupt installation is detected Improvements for extracting posreg and numreg for 9.x in Image Analyzer Fixed a bug where duplicate warning would stay on even when sysvar addition was canceled Added verbose debugging setting to Run CF Locally In addition to IE, allow Edge, Chrome, Firefox, Brave browsers to be chosen for the default browser Added setting to restore the Transfer Window if it's minimized when a transfer starts Added hybrid backups 3.0.85 Fixed a bug in KCL Commander where paths containing backslash were misinterpreted Improvements t0 Image Analyzer (v5.20 support) 3.0.84 Fixed a bug with file filtering when a ! file type was last in the list Fixed a bug where it was sometimes impossible to add new file types 3.0.83 Fixed a bug where ARRAY OF INTEGER would be detected as a STRUCTURE in Image Analyzer Added powershell support for 3rd-party FTP. Added PMC address calculator under FANUC tools. Fixed the password detection for iB+ robots Began implementing dark theme Added Option List to Image Analyzer Added UD1 and MC devices under Explore VR Path Now allows re-put on previously successful transfers Added the ACTIVE/PASSIVE FTP mode choices under project properties 3.0.82 Internal release. 3.0.81 Fixed a 3.0.80 bug where backing up a disconnected robot would crash ERBU 3.0.80 Removed housekeeper due to threading issues Better logging of errors and better continuation during errors Changed empty credentials from anonymous to . This works better when passwords are enabled on the robot Added retry to failed gets Added "pwd" and "ls" commands to KCL commander Attempt to fixed scroll wheel causing crashes in KCL commander 3.0.79 Internal realese Better debug messages for Unable to connect messages Added PMC port to VR properties Enabled the replace IO states tool under FANUC>Tools Adding a profile while in the project properties, will make that profile avaialble as a choice Any operation calling for a backup to be deleted will now just send it to the recycle bin Added detection of INSTALL level password for virtual robots Added housekeeper (beta) Changed the network card detector in BootP to allow user to choose card on failed compatability check Shift + Click on Compression program link will clear the setting Added more Tools to KCL Commander 3.0.78 Expanded the list of robot order options Fixed the problem of transfer complete box getting lost behind other windows Changed the comparer in Backup Manager so that it uses the not (\!) operator and file type list order like the backups do Fixed a bug in typing in KCL Commander Added a tool to remotely add the ERBU PC to robot FSAC table if the robot has PCIF Fixed a bug where robot names were being cut off on put confirmation prompt for long file lists Vision can now be detected on virtual robots Fixed a bug where VR info would be out of sync with the VR robot list Expanded the PMC and DCS rack information by slot Added INI setting for adjusting the ping timeout Fixed a serious bug where backups of FR: using faster listings would be incomplete Title now just reads "ERBU" 3.0.77 Fixed (attempt) a bug where clearing the latest directory would sometimes indicate it did not work Added post-backup scripting to allow running external batch files or exe's after a backup is made Vision links are back! Added links to current io, number registers, and pos registers Added note to KCL commander about HTTPKCL vars Double clicking a failed put on an LS file will now open your editor to the line/column shown - Supported editors: Ultra Edit 64, Multi Edit 9/2008, Notepad++, Notepad2 Added function to add FANUC robot IP addresses to IE's Trusted Sites Fixed a bug where a failed backup file would sometimes fail the subsequent files 3.0.76 Fixed a bug where auto backup was not properly reading the save location 3.0.75 Removed the minimum requirements for MAC address Added FTP credentials to Generic robots Added add media backup to robot right click menu Fixes for active mode on generic robots Force Internet Explorer on FANUC robots since vision is only supported on IE Fixed a bug where cycle power was only working once Removed error where exception gets thrown while sorting filters during DB write 3.0.74 Fixed typo on GUI Strip invalid chars before storing vendor names in local hashtable Better name assumption when loading dictionaries Removed details button from BootP On DragDrop, bring transfer window to front Fixed a bug when Abort All on a disconnected VR Added a "Don't prompt me again" option to some custom dialogs Allow some variation in image file count when determining valid image restore folders Added the controller memory info in Help>FANUC Added Put Device manager to allow custom Put locations Added Backup Source manager to allow custom backup locations Fixed anchoring problem in Backup window Fixed RobotNeighborhood path when it's installed on the non-system drive Fixed a bug when detecting the current gateway settings Auto format MAC addresses to XX-XX-XX... in case of manual entry Added Image Analyzer The brand of the last added robot is remembered and used by default next time Added "Add a media backup..." in backup manager to allow incorporating backups made from MC/USB to the backup directory Improvements to FEATURE detection Fixed a bug in View in Editor (cleaned) and prepended file name to master.ls and compare.ls Fixed a crash when comparing files cleaned Added link to firewall under Network setup For FANUC robots, removed the Vision Setup and Vision Runtime links from the context menu since the links vary by robot OS and it's slow to detect if the robot has vision. For FANUC robots, allow pinging to return true because some ERBU tasks are valid in this state. Changed failed message to a warning message when SysVars converted on SV load Added Retry option when copy from dated to latest fails along with better description Added better fault handling for IO errors when adding notes to images 3.0.73 Fixed a path creation problem when comparing files using source folders Added FANUC>Tools>LS Line Renumbering Added Gateways to network profiles Improved DHCP detection for network profile matching Fixed project properties to properly show the selected network profile for the project Changes to WarPing vendor recognition Changed nomenclature 'FANUC Robotics America' to 'FANUC America Corporation' Cosmetic improvements Added registration failure code to help troubleshoot registration problems. Changes to RDM broadcasts Fixed PTW32 drive letter assumptions Exception handling for "Check Now" updater Added code to upgrade older databases that were missing FTPLogin and were incompatable Added slots to description for DCS rack in Help>FANUC>I/O Rack Numbers Fixed anchoring problem on Robot Options form Hovering over backups in Backup Manager will now show the notes (from notes.txt) stored for that backup FANUC Web Server is slow, forcing these changes: - Changes to Cycle Power logic when HTTP is used - Changed how features are read when HTTP is used Fixed Network Adapter/IP address selector on WarPing window KCL Commander remembers its last window size 3.0.72 Fixed a bug introduced in 3.0.71 where Put to MD:(or FR:) would throw an array index out of bounds exception 3.0.71 Added 'Not' check box for easier file exclusion setup Add file type now clears old data when the form loads Added a workaround to address a shortcoming in the ping function where a ping to a local loopback address wound fail if there was no connected network Fixed a bug where if APPLDICT.TX was supplied lowercase, it would be loaded to the incorrect dictionary name. Changes to WarPing to use internet (if available) or local hashtable for vender lookup Added 'Vendors' table to the database to store the local hashtable Added FTP login and password for password protected robots Fixed a bug where filenames would be appended with numbers due to list formatting problems from older FANUC robots 3.0.70 Add robot now clears the any previously entered data when the form displays Better handling of backing up to missing removable media Fixed a bug where VR names would not be unique if robots were added by cloning in Roboguide Added debug messages to RDM detection Made application launching single click instead of double in Preferences Added exclusion escape sequence to File Types in Backup ('/!' prefix excludes that filetype) Added scrolling text option for eMsgBox for cases where the amount of text exceeds the screen height 3.0.69 Public release of 3.0.68 changes 3.0.68 Fixed a bug where the operator manual pdf would not open if the file explorer was other than Windows Explorer Fixed a bug where the Robot Neighborhood would not open if the file explorer was other than Windows Explorer Added buttons to Backup Manager tree for node collapse, expand, clear Added I/O rack reference to the FANUC help Better checking if Robot Neighborhood is installed Fixed a bug where editing a network profile added a new one instead Database resized to allow multiple ip addresses per profile Support added for multiple ip addresses per profile like: "124.16.11.10, 124.16.12.10" No longer adds robots with duplicate ip addresses to RMD discoveries Added descriptions to CF file manager via --ERBU.Decscription: v8 FANUC software broke the links to the vision setup Force Internet Explorer for Vision links since that's all FANUC supports Fixed anchoring issue with CF Manager Added R30iA note to repower prompt dialog Fixed missing file icon in Backup Manager Double clicking the always on top box will restore and bring to fron the main window Added robot software and application to the database Now using robot version to properly set the vision links Added special case for loading APPLDICT dictionary since it's naming convention is different Last Update path and last Bounce path are stored separately from last Put path Fixed a bug where hitting F2 (properties) on a VR would show properties as a real one Added F2 and Delete shortcut keys for Properties Changed text on stopwatch buttons Replacing code that would require FANUC robot server with HTTP web requests When VR's are detected, automatically unlock their HTTP via RPC When real robots are selected, automatically try to unlock their HTTP via telnet Added tool to correct privileges in Windows 10 Added informational messages to the transfer status window Fixed a bug in detecting the PowerTerm path Fixed a bug where the RDM button could be visible on the virtual robot properties window Put to * now chooses *.* filter if it exists and a filter was not chosen before Added auto-unlock of HTTP when SW version is detected on manually added robots Changed the PowerTerm script directory to work better with Win10 permissions Added FANUC robot order option list to help 3.0.67 Compare file types now remembered independantly of filter types Fixed type mismatch in Update From Device Fixed anchor problem with robot count on RDM window 3.0.66 Internal release -- Added support for third party file explorers such as XYplorer Fixes to file counting in Auditor and Manager properties Added robot count to RDM window Compare program finally gets remembered Fixed a bug with passing empty paths when restoring images Improvements to compare performance Fixed a bug when picking a source folder for compares Fixed a bug with the smart compare switching to binary compare Added progress bar and cancel button for compares Fixed a bug where not showing properties in right click menu in compare Changing compare types now properly clears the previous compare info Recursive FR: backups supported Fixes to archive paths 3.0.65 Fixed link to update page when an update is found Fixed (hopefully) the 'Failed to clear Latest directory' error Partial system beep suppression when a filter override key is pressed Added syntax check to filenames when updating from device Filter override key will now show the override filter when no robots are selected Fixed the "Close when done" checkbox 3.0.64 Fixed a problem where the robot hostname did not specify the port when running a CF locally on a VR. Added support for new sysframe.va format when making sysframe.cf Added auto load of dictionary files (dicts are copied to fr: for loading) Added tip of the day Added better support for local loopback addresses when VR's use RIPE Fixed a bug where the CF form misloaded Added auto-retry to RDM broadcast Added file type filter override keys Added alphabetical file finding when keys are typed in the transfer status box Improved handling of errors when deleting open files from Backup Manager Fixed a bug where single quotes were disallowed in WiFi network names v3.0.63 Replace invalid characters in virtual robot names with valid stand-ins Can now double click backup files on the transfer list to open the downloaded file Fixed a bug where the drag/drop robot could not be determined if no robot was hightlighted Added copyright notice to about dialog. Added a chime to the drag/drop dialog prompt. Fixed a bug where losing focus of the sysvar edit window would erase its contents. Changed ping interval of virtual robots since the discovery of a memory leak in the FANUC robot neighborhood module. Added Import/Export to SysVar notes window. v3.0.62 Internal release v3.0.61 Fixed error message in Run CF manually Added Update from FR: Combined Put to FR and Put to MD Combined Update from FR and Update from MD Allow out-of-order RDM reponses Added mousewheel functionality to sysvar list v3.0.60 Retry link always visible for failed transfers Fixed a serious bug where deleting a backup from the Backup Manager would delete more than the backup selected v3.0.59 Improvements to bounce: - Bounce now remembers the last folder location - Bounce can retry just like put - Double clicking the failed file will open it for edit Manually running a CF file now has continue and edit options on failed lines v3.0.58 Version in about now indicates demo when applicable Fixed a problem with the KCL script v3.0.57 Fixed a bug where Add Robot button not enabled after adding a project v3.0.56 Fixed a bug when adding a project when no other projects exist v3.0.55 Removed Skip Verify from TFTP Added reput for easy retry of failed files Made the frmTransfer window with horizontal divider so sections are sizable Added ability to add notes to backups (notes.txt) Added CF manager Added stopwatch to tools Added VR port handling for PuTTY Improvements to RDM v3.0.54 Internal Release v3.0.53 Portability improvements Image restore added Fixed a bug where newly added network profiles were not immedately available in the project profiles drop-down menu Fixed a bug where robots were not being refreshed when a new project was added Fixed a bug where the sysvars would still pull from an AppPath database even if another one was chosen Improved folder browser for file restore Added RDM for adding FANUC robots Require password for SMON Double click on robot opens properties Fixed bug in setting robot clock Better checking for PCIF Remember last put folder Removed upgrade notices regarding the INI file v3.0.52 Made Run CF non-modal for conveinence Added Error Table lookup Fixed pinging of virtual robot broken by 3.0.51 v3.0.51 Fixed pinging of virtual robots to include "Available" robots. Fixed title append problem on CF window Fixed done button on CF form Fixed Select/Deselect on Manage screen White icons on sysvars window Made profiles window sizable Added link to Robot Neighborhood for Virtual Robots Added quick register on start-up Added demo mode for unregistered copies (1 project, 1 robot) Added notes to image backups v3.0.50 Image backup added. v3.0.49 Increased download timeout. Supports longer path names in the database. v3.0.48 Cosmetic improvements. Improved update checking. v3.0.47 Added KCL password credentials to robot properties. v3.0.46 Enabled auditing. Added always on top drag and drop. v3.0.45 Cosmetic bug fixes. Changed default directory on DOS FTP sessions. v3.0.44 Cosmetic bug fixes. Enabled Backup Manager. v3.0.43 Added MAC address option for verifying robots. v3.0.42 Auto Join finally working for WiFi networks (no feedback). v3.0.41 Smarter identifier checking and messaging. Added place holders for MAC address checking. v3.0.40 Added default source code for projects. Added source code to robot properties. Fixes to hardwired network profile manager. v3.0.39 Added Cancel to VR detection and Auto Backup Scheduler to Setup. v3.0.38 Added option to close Transfer Window automatically if pending transfers complete ok. v3.0.37 Fixed link for setting default backup root folder. v3.0.35 Check for updates added. v3.0.34 Fixed a bug in recognizing Telnet client. v3.0.33 Cosmetic messaging fixes. Allow Update of nonexistent files. v3.0.32 Added multi-select for Bounce to MD: and Update from MD:. v3.0.31 Fixed timeout error when unprotecting files on virtual robots. v3.0.30 Fixed line selection issue on scrolling CF programs. v3.0.28 Dropdowns are smarter. v3.0.27 Fixed a bug causing auto backups of virtual robots to fail. v3.0.26 Fixed a bug when running a CF manually threw exceptions at end of file. v3.0.25 Fixed a bug when putting to FR:. v3.0.22 Partial fix to keep AddProfiles from failing if no network cards exist. v3.0.20 Fixed null reference when sorting the file type list from Backup Settings. v3.0.19 Added multiselect for put to MD:/FR: v3.0.01 Internal release.